Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in Marietta, GA | Kestrel Air Duct Marietta
We clean and repair Trane duct systems across Marietta, and we do it as an independent service provider, not a manufacturer arm. Most Air Duct Cleaning in Marietta jobs run between $450 and $900 for a full single-system home, depending on the duct count and how much pollen and construction dust we’re pulling out. The thing that sets our Trane work apart here: we know exactly how Marietta’s pine pollen, attic humidity, and 1970s-to-2000s housing stock interact with Trane’s metal and flex duct designs. Call (762) 533-6494 for a free estimate, and you’ll get a written price before any duct is touched.
Why Marietta Residents Choose Us for Trane Service
Dale Whitmore, our owner, cut his teeth on residential and commercial HVAC systems across the Southwest and has been running crews in greater Marietta for several years now. He built his reputation on thorough negative-air extraction, meaning a high-powered vacuum creates suction at the trunk line so loosened debris gets pulled out instead of redistributed through your home, combined with rotary brush agitation, a spinning brush that physically scrubs the duct walls before anything gets vacuumed away. Our techs are background-checked and uniformed, and they run Rotobrush, Nikro, and Abatement Technologies equipment, real professional tools, not box-store shop vacs. Whether your Trane gear sits in a 1970s split-level off Whitlock Avenue or a 2000s East Cobb colonial, the process stays the same: we show up in the window we gave you, we put the price in your hands before work starts, and we back it with the 365-Day Done Right Promise in writing. If it’s not done right, we come back and make it right on our dime.
We also stock OEM-compatible duct board, mastic, and flex locally so we can move fast on Trane repairs without waiting on a supply house in Atlanta. That matters in July when your air handler is short-cycling and the attic is 130 degrees.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Solve in Marietta
- Sealed Trane ductwork trapping spring pollen loads. Marietta’s oak and pine canopy dumps an enormous amount of particulate into the air from March through May. Trane’s sealed duct design is efficient, but when the system is running constantly, that pollen gets pulled through the return side and caked onto blower wheels and coil surfaces. We see it every week in late April.
- Trane CleanEffects collection cells overloading and dumping debris back into supply runs. The CleanEffects whole-home air cleaner works well until the collection cells saturate. Then the system pushes captured debris downstream into the supply runs. If you have a CleanEffects unit integrated into your Trane ductwork, we check those cells on every cleaning and let you know if they need washing or replacement.
- Failing external insulation on older Trane metal ducts near Marietta Square. Those ranch homes and Craftsman bungalows from the 1950s and 60s often have original hard metal ducts. The exterior insulation breaks down over decades, absorbs attic humidity, and feeds mold growth near the coil surfaces. We see this constantly in the neighborhoods around the Square.
- Sagging and torn Trane flex ducts in East Cobb rebuilds. Teardown-rebuilds throw drywall dust and debris into the air constantly. In newer homes with flex duct runs, that dust settles at low points where the flex sags between trusses, and the takeoffs tear loose. We reseal and rehang those runs as part of the job.
- Rust flakes from condensation on Trane heat exchangers. Marietta’s mild but damp winters create condensation cycles on heat exchangers. In systems where the exchanger sits in a humid attic or crawlspace, surface rust forms and the flakes end up lodged in return registers. A thorough cleaning removes them and we can address the moisture source so it doesn’t just recur next winter.
Trane Service in Marietta: What Local Conditions Mean for Your Equipment
Here’s something a generic Trane page won’t tell you. Marietta’s heavy pine and oak canopy means Trane ducts in East Cobb subdivisions are often found with quarter-inch-thick pollen caked on blower wheels by late April. That load doesn’t happen with the same intensity just across the Chattahoochee in Roswell, where the tree mix and canopy density shift. For Trane owners in Marietta, this means your blower motor works harder through spring, your static pressure climbs, and your variable-speed systems like the XV20i start short-cycling on humid afternoons. We pulled a video scope through a Trane Hyperion air handler in a 2005 Indian Hills home and found sagging flex supply branches with pine pollen packed at the low points. We resealed the takeoffs with mastic, shortened and rehung two sagging runs, and the static pressure dropped enough that the XV20i stopped short-cycling. That’s the kind of fix that comes from knowing this specific city’s pollen load and this specific brand’s duct behavior.
Trane Models & Products We Service in Marietta
We work on the Trane systems we see most in Cobb County housing stock. The XV20i variable-speed air handler with matching Trane ductwork shows up in newer East Cobb builds. XR13 and XR14 split systems are everywhere in 1990s subdivisions. The Hyperion air handler series with flex duct runs is common in 2000s homes, and we see a lot of CleanEffects whole-home air cleaners integrated into those systems. For repairs, we use OEM-compatible duct board, mastic, and flex when dimensions need to match the original runs. On hard duct retrofits where factory specs aren’t critical, we’ll use infrared-sealed aftermarket insulation and sheet metal. Repair beats replace for isolated leaks; we won’t upsell a full duct swap unless the system is genuinely beyond sealing.
We also handle Trane sales & service calls where cleaning reveals a bigger problem, and we’ll tell you straight if we see something that needs a licensed HVAC contractor’s attention.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in Marietta
Most Trane air duct cleaning jobs in Marietta run between $450 and $900 for a full single-system home. Smaller condos and townhomes may come in under that. Larger homes with multiple systems or serious pollen and construction dust buildup can push toward the top of the range. What drives the price: the number of supply and return runs, whether the system is hard metal or flex, how accessible the air handler is, and whether we’re also doing flex duct repair, duct sealing, evaporator coil cleaning, or video inspection, or our Dryer Vent Cleaning in Marietta. Every estimate is free, and the written price you get is the price you pay. No door-step revisions. Call (762) 533-6494 and we’ll give you a number you can hold us to.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Marietta
Every three to five years for most Marietta homes, but Trane owners in the heavier canopy neighborhoods like East Cobb may want every two to three years. If you can see pollen dust around your supply registers by late April, or if your CleanEffects indicator is cycling more often than it used to, you’re due. Call (762) 533-6494 and we’ll scope the ducts and tell you what’s actually in there before recommending anything.
Yes, in most cases. We access the coil through the service panel and clean it in place with professional coil cleaner and a wet vacuum, even in tight attic spaces like the ones in 1980s and 1990s homes around Sprayberry and Piedmont Road. If the coil is deeply impacted or the cabinet is too tight, we’ll tell you straight and talk through the options. Most jobs don’t require pulling the handler.
Flex duct sags when the original install left too much slack, when the support straps are too far apart, or when attic heat softens the outer liner over time. In Marietta, the humid summers accelerate that softening. The fix is resealing the takeoffs with mastic, shortening the run where possible, and rehanging with proper support. We do this as part of Trane service in Woodstock calls too, since the same flex issues show up there.
Usually yes, if the metal is sound. Isolated leaks in hard metal respond well to mastic sealing, and the efficiency gain in drafty older homes is meaningful. The exception is when the exterior insulation has degraded badly or rust has compromised the metal itself. In those cases you’re looking at replacement sections, not just sealing. We’ll scope it, show you the footage, and give you a straight answer on repair versus replace.
Yes, but we work carefully around the insulation and the attic access in those older homes. The challenge is that old blown-in insulation shifts easily, and you don’t want it falling into open duct cavities during the job. Our techs know how to handle that, and we leave the attic cleaner than we found it. That’s part of the Kingswell Way code on every visit: say the price, show up in the window, leave it cleaner, put the guarantee in writing.
Service Areas Near Marietta
We serve Marietta service area and the surrounding communities: Roswell, Woodstock, Mableton, North Druid Hills, and Scottdale. If you’re just across the county line, we’ve likely got a route through your area already. For Trane service in Roswell, the spring pollen load is lighter than what we see in East Cobb, but the flex duct issues are similar.
Clean ducts, straight answers, price up front, that’s the whole deal.
Book Your Trane Service in Marietta Today
Call (762) 533-6494 and we’ll schedule your Trane duct cleaning at a time that works for you. We’ll confirm the arrival window in writing, show up on time, and put the price in your hands before any work starts. That’s the Kingswell Guarantee, and it applies to every job we do in Marietta.
Written by Dale Whitmore, Owner at Kestrel Air Duct Marietta, serving Marietta since the company’s founding in 2004.