Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning Service in Marietta, GA
Kestrel Air Duct Marietta provides independent air duct cleaning, coil cleaning, and duct sealing throughout Marietta, GA. We’re not a Trane dealer or authorized service center – we’re the local crew that works inside Trane systems every week and knows exactly where Marietta’s red clay dust, pine pollen, and summer humidity collect in your Hyperion air handler and flex ducts. Most Trane duct and coil cleaning jobs in Marietta run between $450 and $900 depending on system size and how much buildup has accumulated. Call (762) 533-6494 for a written quote before any work begins.
Why Marietta Homeowners Choose Trane Air Duct Cleaning
Trane builds solid equipment. The XR and XL series condensers, the RunTru value line, the Hyperion air handlers – they’re engineered to run for years. But here in Marietta, the air itself works against them. Red clay dust is fine enough to slip past standard filters. Pine and oak pollen blow heavy every spring. And the humidity means anything that does collect inside the ducts or on the coil stays damp long enough to turn into a biological mess.
We clean Trane ductwork in Marietta homes from the historic Craftsman bungalows near the Square to the 1970s-2000s subdivisions out East Cobb way, and our crews also handle Woodstock Trane service. The older homes often have hard metal ducts with aging insulation. The newer ones have flex ducts that sag, compress, and separate at the supply plenum when attic temperatures climb. Both trap debris differently, and both need a different cleaning approach. That’s the work we do.
We are an independent Trane service provider. Trane doesn’t authorize us, endorse us, or warranty our work. What we bring is hands-on familiarity with how Trane systems behave in this specific climate – and a written 365-Day Done Right Promise on every job.
Dale Whitmore, owner of Kestrel Air Duct Marietta, trained at Los Angeles Trade-Technical College and spent years working residential and commercial HVAC across the Southwest before bringing his crews to the greater Marietta area. His specialty is negative-air extraction – a high-powered vacuum at the trunk line that pulls loosened debris out of the system rather than blowing it into your living room – combined with rotary brush agitation, where a spinning brush physically scrubs the duct walls before anything gets vacuumed away. If the work isn’t done right, we come back and make it right. In writing. That’s been the standard since 2004, when the company started under the Kingswell Guarantee.
Call (762) 533-6494 and you’ll get a live person, any hour. We answer the phone.
Styles & brands we work with
Why Trust Kestrel Air Duct Marietta for Your Trane Air Duct Cleaning?
Trane air handlers and coils have quirks that generic duct cleaners miss. The Hyperion air handler’s aluminum Spine Fin coil is a perfect example. Those fins are tightly packed and efficient, but they grab pollen and hair like a comb. Once the coil loads up, static pressure rises, airflow drops, and the blower starts pulling harder – which drags more unfiltered air through every gap in the return path and pushes debris deeper into your supply ducts. A technician who only cleans the registers and calls it a day hasn’t touched the actual problem. Our techs remove the coil access panel and clean that Spine Fin coil directly.
We use professional-grade equipment – Rotobrush rotary brush systems to agitate the duct walls, Nikro negative-pressure units to pull the loosened material out, and Abatement Technologies HEPA filtration to keep everything out of the air you’re breathing while we work. No box-store shop vacs. No pretending a brush on a drill is commercial equipment.
Every technician on your property is background-checked and uniformed. They operate under The Kingswell Way – that’s our on-site code: say the price in writing before work starts, arrive in the window we gave you, leave the place cleaner than we found it, and put the guarantee on paper. If something falls short within 365 days, we return and make it right at no charge.
Dale’s crews have logged hundreds of jobs in Marietta – from Whitlock Avenue to the East Cobb corridor – and we also provide Marietta Trane service across the metro area. We know these houses. We know how original flex duct from the 1980s behaves in a July attic. We know what a Trane XR air handler sounds like when the blower wheel is matted with red clay. Clean ducts, straight answers, price up front – that’s the whole deal.
Common Trane Air Duct Cleaning Problems We Fix in Marietta
- Dust bypassing the filter into the blower wheel and supply ducts. Trane XR and RunTru air handlers often have filter slots with noticeable gaps around the edges. Marietta’s red clay dust is very fine and gets pulled around the filter frame and straight into the blower wheel. By the time we arrive, the blower fins are caked, the supply registers are blowing dust streaks onto walls, and airflow has dropped enough that the system runs longer to hit the same temperature. We pull the blower, clean it, and show you photos before and after.
- Short cycling causing humidity problems in flex ducts. When a Trane system is oversized or the condenser is short cycling – running in short bursts rather than long steady cycles – the coil never stays cold long enough to pull moisture out of the air. That leaves Marietta’s already-humid air moving through the ducts, and inside a dark flex duct in a hot attic, that’s mold conditions. We find mold in supply flex runs on short-cycling Trane systems more than nearly any other scenario we see.
- Spine Fin coil packed with pollen and pet hair. Trane’s aluminum Spine Fin coils are dense by design. But in Marietta’s spring, pine and oak pollen load up solid. Pet hair compounds it. A coil that’s 40% blocked raises static pressure and makes the blower work harder – which pulls even more debris into the ducts. The fix is direct coil cleaning, not just spraying the outside.
- Flex duct compression and separation at the supply plenum. Attic temperatures in Marietta routinely hit 130 degrees or more in summer. Flex duct insulation breaks down, the inner liner compresses, and connections pull loose from the Trane supply plenum. When that happens, attic insulation and red clay dust get pulled right into the air stream. We reconnect, reseal with mastic, and replace collapsed sections when compression is too far gone.
- Condensation buildup in poorly insulated attic duct runs. Marietta’s mild winters with occasional cold snaps create condensation when warm indoor air hits cold metal duct surfaces in a cold attic. Over time, that moisture soaks insulation and supports mold on the duct exterior and inside flex runs. Insulated metal duct in older Marietta homes is especially prone. We address the buildup and recommend sealing or insulation repairs so it doesn’t return next winter.
Trane Parts & Our Repair-vs-Replace Approach
When a repair calls for parts – a blower motor, a control board, a capacitor – we use genuine Trane OEM parts. Trane equipment has tight tolerances and specific electrical specs, and aftermarket parts that are “close enough” cause premature failures. We don’t take that chance. For duct cleaning and sealing work, though, we recommend third-party mastic and high-quality flex duct that meet or exceed OEM specifications. Trane doesn’t manufacture flex duct, so paying a premium for a Trane-branded length of flex doesn’t get you a better product.
On the repair-vs-replace question, we’re honest even when it costs us the job. Given the price of genuine Trane parts, sometimes a coil or heat exchanger can be cleaned and resealed and run for years more. Sometimes it can’t. When the numbers say replacement is smarter, we’ll tell you that before you spend money on a repair that won’t hold. The written quote you get before work starts outlines exactly what we’re doing and what it costs – one flat price per system, no door-step revisions.
If a repair doesn’t hold within the guarantee window, we return and fix it again at no charge. That’s in writing. Call (762) 533-6494 and we’ll walk you through what your particular Trane system needs.
Our Trane Service Process – Step by Step
- 1
Diagnosis. We inspect the full Trane system – the condenser outside, the Hyperion air handler inside, the evaporator coil, the blower wheel, the return path, and the supply ducts. We measure static pressure against Trane’s published range for your model. We show you exactly what we find, including photos.
- 2
Cleaning and sealing. We clean the evaporator coil directly if it’s loaded with pollen or pet hair. We run rotary brush agitation through the supply and return ducts, with negative-air extraction pulling the loosened debris to a HEPA-filtered collection point. We reseal supply plenum connections with mastic and replace collapsed flex sections where needed. Third-party mastic and flex – matched or better than OEM spec.
- 3
Verification. Once the work is done, we run the system and recheck static pressure and airflow. We confirm the blower wheel turns without wobble, the coil is clean, and registers are blowing clear air. If anything measures out of Trane’s normal range, we fix it before we leave.
- 4
Written guarantee. The 365-Day Done Right Promise goes on paper. If anything falls short within a year, call us at (762) 533-6494 and we come back. No charge, no service fee, no argument.
See the difference
Before
After
Before
After
Before
AfterTrane Products We Service & Install in Marietta
We work on the full Trane residential lineup in Marietta and also offer Trane repair in Roswell. That includes the XR Series – the XR13, XR14, XR16, and XR17 heat pumps and air conditioners – the Trane XL Series, the value-line RunTru by Trane systems, and the Hyperion air handlers across all of them. We clean evaporator coils on all these models, clear blower wheels, seal supply plenums, and clean both metal and flex duct runs throughout the home.
Our primary focus on this page is evaporator coil cleaning, supply duct cleaning, and duct sealing. If your Trane system needs work beyond that, we’ll tell you and point you in the right direction – we don’t pretend to be something we’re not.
We Also Service These Brands
While Trane systems keep our crews busy in Marietta, we also clean ductwork and coils on Lennox and Carrier equipment. The principles are the same – direct coil cleaning, negative-air duct extraction, sealed plenums – and we know the failure modes on those systems too. If you have a Trane in one zone and a Lennox in another, we can handle both in the same visit.
FAQs – Trane Air Duct Cleaning Service in Marietta
No. We are an independent Trane service provider. Trane does not authorize, endorse, or warranty our work. What that means for you: we have no incentive to upsell Trane-branded parts or recommend Trane-specific products where a better or more cost-effective third-party option exists – like flex duct and mastic, which Trane doesn’t actually manufacture anyway.
For repairs that require replacement parts – blower motors, capacitors, control boards – yes, we use genuine Trane OEM parts. Trane equipment has specific electrical and mechanical tolerances, and “compatible” aftermarket parts are a false economy. For duct sealing and flex replacement, we use third-party mastic and flex duct that meet or exceed OEM specifications. Trane doesn’t make ductwork, and the premium for a Trane-branded roll of flex isn’t buying you better material.
For most Trane systems in Marietta, every 3 to 5 years is appropriate. Homes with pets, heavy spring pollen exposure near pine and oak stands, or recent renovation work should lean toward every 2 to 3 years. If you’re seeing dust streaks at the registers, noticing a musty smell when the system starts, or seeing visible dust buildup around the return grille, it’s time now. Call (762) 533-6494 and we’ll give you an honest read on condition.
Yes, usually measurably. A clean coil transfers heat far more efficiently than one packed with pollen and red clay dust, which means your Trane system pulls humidity more effectively and cools your home faster. We’ve seen static pressure drop back into the normal Trane range after a deep coil clean, and homeowners report shorter run times and lower humidity inside within days. If your coil hasn’t been cleaned in years, schedule it – call (762) 533-6494 for a free estimate.
Yes, consistently. Flex ducts in Marietta attics sit in 130-degree heat through the summer, and when cool air moves through them, condensation forms at the inner liner when there’s any insulation gap or compression. That moisture combined with the organic material from pollen and dust creates mold conditions we rarely see in hard metal duct. The older craftsman homes near the Square with metal ducts have their own issues – aging insulation and rust – but mold is overwhelmingly a flex duct problem here.
The blower motor and blower wheel. When the evaporator coil is packed with debris and static pressure rises, the blower works harder and runs longer – which shortens motor life and leaves the wheel caked with fine red clay dust. We regularly pull blower wheels from Hyperion air handlers that look like they’ve been dipped in Georgia mud. The good news: a thorough coil cleaning and duct extraction takes the strain off immediately. Call (762) 533-6494 to schedule an inspection.
Most two-story Marietta homes run between 4 and 7 hours of on-site work depending on system size, how many returns and supplies there are, and how much buildup has accumulated. We don’t rush it – negative-air extraction and rotary brush agitation take the time they take. But yes, in nearly every case, we’re done the same day. For an exact time estimate and a written price, call (762) 533-6494.
For a typical single Trane system in Marietta, expect somewhere between $450 and $900 depending on home size, number of ducts, and coil condition. Add evaporator coil cleaning and you’re usually at the upper end of that range. You’ll get an exact written price before work begins – one flat price per system, no per-vent pricing, no revisions when we arrive. Call (762) 533-6494 for a free estimate.
One more Marietta-specific note worth stating plainly: we arrived at a cul-de-sac off Whitlock Avenue a while back where a Trane XR16 heat pump had been short-cycling for weeks. The Hyperion air handler’s blower wheel was matted with red clay dust. The aluminum Spine Fin coil was clogged solid with pollen. The flex ducts at the supply plenum had collapsed in the attic heat. We deep cleaned the coil, cleared the blower, reconnected and resealed the flex runs, and confirmed static pressure dropped back into the normal Trane range. The system ran cooler and quieter that same day. That’s the job.
Book Your Trane Service in Marietta, GA
We give you the price in writing before a single vent is touched. We arrive when we say we will. We leave the place cleaner than we found it. And the guarantee is on paper. If your Trane ducts, coil, or plenums need attention in Marietta, call (762) 533-6494 for a free estimate. A real person answers.
Written by Dale Whitmore, Owner at Kestrel Air Duct Marietta, serving Marietta since 2004.