Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Abatement Technologies Dryer Vent Cleaning in Marietta: What to Know First
We clean dryer vents for Abatement Technologies systems throughout Marietta, and most jobs are done in a single visit that runs 60 to 90 minutes. The honest price range sits between $120 and $220 for a standard single-story home, with second-story or long-run vents pushing into the $180 to $280 range. You’ll have a written price in your hands before we touch a single vent, and that number won’t change at the door.
This page is for Marietta homeowners who own an Abatement Technologies dryer vent or filtration component and want someone who actually understands how these units behave when lint builds up. If that’s you, call (762) 533-6494 and we’ll get you scheduled.
How Abatement Technologies Products Fail – and How We Fix Them
Abatement Technologies builds serious air-movement equipment, but any dryer vent attached to one still collects lint the same way. Here’s what we see most often in Marietta homes, and what we do about it.
- Lint bypass at the Abatement Technologies internal filter junction. On units paired with high-efficiency dryers, lint slips past the internal lint screen and packs into the first elbow behind the dryer. We remove the transition duct, extract the compacted lint by hand, then run a rotary brush through to clear what’s stuck to the duct wall. This is the number one cause of “clean filter, still slow drying” we see.
- Crushed or kinked flex duct at the Abatement Technologies connection point. The dryer gets shoved back against the wall, the flex duct accordions, and airflow drops. We replace damaged sections with rigid or semi-rigid duct where code allows and add a periscope fitting when clearance is tight, so the vent breathes even with the dryer pushed back.
- Outside vent hood flap stuck open on Marietta’s humid days. We get called for musty dryer smells that turn out to be a vent hood that never fully closes. That lets Marietta’s summer humidity crawl back into the duct and into the dryer drum. We replace the cap with a magnetic or spring-closure model and verify the flap seats properly before we leave.
- Bird or rodent entry through an unguarded Abatement Technologies vent termination. This is common along the tree-heavy neighborhoods east of Marietta Square and up toward East Cobb. We remove the nesting material, clean the duct, then install a bird guard that keeps critters out without restricting airflow. It’s a simple fix that prevents a repeat visit next spring.
- Long vertical runs that never fully clear with a standard cleaning. Some Marietta laundry rooms are on the second floor with the vent terminating at the roof. A homeowner’s shop vac can’t reach that. We run a rotary brush on a flexible shaft the full length of the run, then use negative-air extraction to pull everything loose into a HEPA-filtered containment unit, not back into the laundry room.
Styles & brands we work with
Our Abatement Technologies Dryer Vent Cleaning Process
- 1
We answer the phone and give you a straight price range. A live person picks up, you describe the setup, and we give you the honest range for a Abatement Technologies dryer vent cleaning in Marietta. The written quote is confirmed before work begins.
- 2
We pull the dryer out and inspect the full run. Our tech examines the connection at the dryer, the entire duct path, and the outside termination. We’re looking for kinks, gaps, loose joints, and any sign of pest entry.
- 3
We decide with you on parts. If a vent hood, transition duct, or cap needs replacing, we tell you the exact cost for OEM-spec or quality aftermarket before anything is ordered. No surprise line items.
- 4
We run the full cleaning sequence. Rotary brush agitation scrubs the duct walls, negative-air extraction pulls loosened lint and debris out of the system, and HEPA filtration keeps it out of your laundry room air. Every Abatement Technologies job gets this full treatment.
- 5
We test airflow and document the results. We check the vent termination for full exhaust flow and show you what came out of the duct. You get before-and-after photos of your own vent, not stock images.
- 6
We leave the street cleaner than we found it and put the guarantee in writing. The 365-Day Done Right Promise means if the vent clogs again within a year and the cleaning was the issue, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterWhat Abatement Technologies Dryer Vent Cleaning Costs in Marietta
Here’s what we charge in Marietta for the most common Abatement Technologies dryer vent scenarios. The written price is always confirmed before work begins.
- Standard single-story, rear-wall vent: $120 – $160
- Two-story home with longer vertical run: $180 – $240
- Bird guard installation with cleaning: Add $45 – $75, depending on vent location
- Vent cap replacement (flap or louver type): Add $40 – $80, maerial included
- Rerouting or replacing damaged duct section: Quoted on site, always approved by you first
What moves the price is the length of the run, how many elbows are in it, and whether we’re on a roof or a ladder. Most Marietta Abatement Technologies owners land between $120 and $220. Call (762) 533-6494 for a free estimate on your specific setup.
Why Marietta Homeowners Call Kestrel Air Duct Marietta for Abatement Technologies Work
We’re the local shop that writes the price down before the work starts and puts a 356-day guarantee behind the job, in writing, every time. That’s the Kingswell Guarantee, and it applies to every Abatement Technologies dryer vent cleaning we do in Marietta. If the vent fails within a year and it’s on us, we come back at no charge. No phone tag, no fine print.
Our techs are background-checked and uniformed, and they know Abatement Technologies equipment because they’ve worked on it across Marietta’s neighborhoods, from Whitlock Avenue out to the East Cobb corridor. We also service Lennox, Trane, and Carrier dryer vent systems, so we know how different manufacturers’ setups behave and where they fail. That broad experience means we don’t treat your Abatement Technologies vent like a generic tube. Dale Whitmore runs our crews, and he’s held the same standard for years: clean ducts, straight answers, price up front. That’s the whole deal.
FAQs
No. Regular dryer vent cleaning is a maintenance item, not a modification, and it won’t void your Abatement Technologies warranty. In fact, keeping the vent clear reduces stress on the dryer motor and helps the unit run within its design spec. We never alter the dryer itself; we clean the exhaust path attached to it.
When a part needs replacing, we give you the honest choice. OEM-spec parts match what the manufacturer supplied originally, while quality aftermarket options often cost less and hold up just as well for vent hoods, caps, and transition ducting. We quote both where available and let you decide before we order anything.
Most jobs are scheduled within a few days, and we work around the arrival window we give you. If the vent is completely blocked and the dryer has stopped drying, tell the person who answers the phone and we’ll prioritize it. Call (762) 533-6494 and we’ll give you the soonest available window, not a vague “sometime next week.”
Because they cleared the easy part and missed the real blockage. On Abatement Technologies systems, the most common repeat-clog point is the first elbow behind the dryer where the transition duct connects. A quick clean that never pulls the dryer out leaves that packed lint in place, and airflow drops again within weeks. We pull the dryer, inspect the full run, and clear every bend, not just the straight section.
Call (762) 533-6494. You’ll speak with a live person who can give you an honest price range for your setup and schedule the visit. The written price is in your hands before a single vent is touched.
Written by Dale Whitmore, Owner, Kestrel Air Duct Marietta at Kestrel Air Duct Marietta, serving Marietta and nearby areas.